Quick answer: If the indoor unit in your attic has no gas pipe and no vent pipe, it’s almost certainly an air handler. It holds the blower that moves air through your ducts, the indoor coil that cools (and on a heat pump, heats) and often backup heat strips. A unit with a gas pipe and a vent is a furnace.
In this guide
What’s inside an air handler?
A blower, a coil and the parts that support them, all in one metal cabinet:
- A blower that pulls air in from the return (the grille that draws house air back) and pushes it out through the supply ducts.
- An indoor coil where refrigerant cools the air in summer and, on a heat pump, warms it in winter.
- Electric heat strips that glow hot like the wires in a toaster, serving as backup heat or, with a straight AC, as the main heat.
- A drain pan and drain line that carry off the water the coil pulls out of the air.
- A control board that takes its orders from the thermostat.
Why is my air handler in the attic?
It saves floor space, and Central Texas builders have put equipment up there for decades. Some homes tuck the air handler into a hall closet or the garage instead.
The catch with the attic is heat. The unit and its ducts sit in air that can top 130°F in summer.
What does an air handler do in summer and winter?
It cools in summer and, on a heat pump, heats in winter. In summer, the blower pushes house air across the cold coil and sends cooler, drier air to your rooms through a ductboard plenum (the box that feeds the ducts) and flex duct runs (the round, bendable ducts to each room). In winter, a heat pump runs the same coil hot, and the heat strips help on the coldest nights and during defrost, when the outdoor unit briefly melts frost off its coil. With a straight AC (one that only cools) and heat strips, the strips do all the heating.
What is the pan under my air handler for?
That’s a secondary drain pan, a backup that catches water if the main drain clogs. Many units also have a float switch, a small sensor that shuts the system off when water rises. Water sitting in that pan usually means the main drain line is backing up, or the unit’s built-in pan is leaking. How to clear a clogged drain line covers the fix.
What can you safely check on an air handler yourself?
Four things, none of which require opening a service panel:
- The filter sits in a slot at the air handler or behind a return grille in a ceiling or wall. Check it monthly, as ENERGY STAR suggests.
- The service switch looks like a light switch and sits near the unit. If the system is dead, make sure nobody bumped it.
- Keep storage clear around the unit so a technician can reach the panels.
- Check the drain pan. Look for standing water or rust whenever you’re up there.
Go up in the cool of the morning in summer, walk only on decking or joists (the wood beams), since the drywall between them won’t hold you, and leave the panels closed. The wiring and refrigerant behind them are jobs for a licensed technician. Gold Eagle’s technicians service, repair and replace air handlers across the Austin area; see our AC services.
What should you do next?
- Look for a gas pipe and vent pipe on your indoor unit to tell an air handler from a furnace.
- Check the filter monthly and change it when it looks dirty.
- Look in the secondary drain pan for standing water or rust on your next attic trip.
- Book a tune-up so a licensed technician can check the parts behind the panels.
Related guides: HVAC System Parts Explained: What Each Component Does and How Often Should You Change Your AC Filter in Central Texas?
About Gold Eagle Services: This guide comes from the team at Gold Eagle Services, a family-run Austin HVAC, indoor air quality and mold remediation company founded in 2017. We’re licensed (TACLA119235 and RCO1783), insured and bonded, and we serve homes across the greater Austin area.
Need help with this in your home? Learn about our heat pump repair and installation, or call 512-489-4653 to schedule a visit.
Related Gold Eagle service: AC repair in Austin

HVAC Systems
Heating
Ductwork & Air Flow
Ventilation
Filtration
Dehumidification
Maintenance
Mold
Remediation & Restoration
Your Home
Building Science
Insulation & Envelope
Health & Safety
Case Study


